PRODUCTS
PAGE 1 OF 15
Ateis MESSENGER PRO Vertical Active DSP Array - 12 channels
Ateis MESSENGER PRO Vertical Active DSP Array - 12 channels
AT-MES-MESSENGER-M
MESSENGERG2-M - 12 Loudspeakers - 1698 mm - 94 dB to 25 m.           ATEÏS introduces here next generation range of steerable line-arrays that are fully redesigned to meet the current and future demands for the Voice-Alarm industry, commercial audio and Pro-sound. The MESSENGERG2  is a through ‘next generation’ design where we have focused on an improvement on the lobe-controls and the overall technical specifications, we can now say that the MESSENGERg2 provides broadcast  S/N ratio, music quality frequency respond and a pro-sound power handling with more advanced pre-processing abilities. New generation ATEÏS Voice-Alarm and audio processors are equipped with remote control facilities by LAN or WAN and have a variety of networking and control cards. To meet our future standards, the MESSENGERG2 has been equipped with equal networking facilities. The input section has been redesigned and upgraded to broadcast standards and has now 2 fully controllable audio inputs and outputs with override functions and hardware bypass function. The output to the slave unit’s caries either the pre-processed mixed signal of the input mix and thus provides easier room control as equalization and feedback filtering or the original ‘floor’- signal. Additional input-cards can be provided to have a digital link between Messengers or to interface with an ATEÏS network based on the M-Net™ or AteÏs-Net™ and can be controlled using the new ATEÏS Studio™ system designer and controller software. An optional Messenger-rack-controller (MRC), half size 1U/19 inch rack frame,  facilitates 2 fully controllable audio inputs and two slave outputs,  TCP-IP connection, RS485 and the digital networking M-Net™ to digital interface with the Messengers. The external interface is also ready to receive the instructions of the new ATEÏS Studio™ remote Control software. The MESSENGERG2 is designed to meet with the modern standards for Voice Evacuation and equipped with a dual-mode redundant power supply and redundant link between the Messengerg2 and the optional external MESSENGERg2 controller (MRC).  M-Net™ Messenger nodes can be placed up to 100 m away. For longer distances a fiber-optic convertor is available. Each MESSENGERG2 array has a very tightly controlled beam, which can be shaped as required for specific applications or environments requiring symmetrical or asymmetrical, single, dual or triple lobe designs.  The availability of high power audio DSP’s such as the analogue devices makes it possible to provide 24 channels of powerful processing that lead to precise beam control and even signal pattern that stays within 3 dB over a distance of 100 m. The MESSENGERG2 range is completely software controlled, the variable acoustical centre can compensate for architectural requirements and can be easily adapted for specific types of application.  Its flexible mounting height of between 1.2 and 4 m above ground level ensures the array can be securely positioned. “The MESSENGERG2 arrays are one of the only active array’s that can be used for Voice Evacuation applications where high intelligibility can be of live saving need.”
Ateis MESSENGER PRO Vertical Active DSP Array - 18 channels
Ateis MESSENGER PRO Vertical Active DSP Array - 18 channels
AT-MES-MESSENGER-L
MESSENGERG2-L - 18 Loudspeakers - 2370 mm - 94 dB to 30 m.          ATEÏS introduces here next generation range of steerable line-arrays that are fully redesigned to meet the current and future demands for the Voice-Alarm industry, commercial audio and Pro-sound. The MESSENGERG2  is a through ‘next generation’ design where we have focused on an improvement on the lobe-controls and the overall technical specifications, we can now say that the MESSENGERg2 provides broadcast  S/N ratio, music quality frequency respond and a pro-sound power handling with more advanced pre-processing abilities.New generation ATEÏS Voice-Alarm and audio processors are equipped with remote control facilities by LAN or WAN and have a variety of networking and control cards. To meet our future standards, the MESSENGERG2 has been equipped with equal networking facilities. The input section has been redesigned and upgraded to broadcast standards and has now 2 fully controllable audio inputs and outputs with override functions and hardware bypass function. The output to the slave unit’s caries either the pre-processed mixed signal of the input mix and thus provides easier room control as equalization and feedback filtering or the original ‘floor’- signal.Additional input-cards can be provided to have a digital link between Messengers or to interface with an ATEÏS network based on the M-Net™ or AteÏs-Net™ and can be controlled using the new ATEÏS Studio™ system designer and controller software. An optional Messenger-rack-controller (MRC), half size 1U/19 inch rack frame,  facilitates 2 fully controllable audio inputs and two slave outputs,  TCP-IP connection, RS485 and the digital networking M-Net™ to digital interface with the Messengers. The external interface is also ready to receive the instructions of the new ATEÏS Studio™ remote Control software.The MESSENGERG2 is designed to meet with the modern standards for Voice Evacuation and equipped with a dual-mode redundant power supply and redundant link between the Messengerg2 and the optional external MESSENGERg2 controller (MRC).  M-Net™ Messenger nodes can be placed up to 100 m away. For longer distances a fiber-optic convertor is available.Each MESSENGERG2 array has a very tightly controlled beam, which can be shaped as required for specific applications or environments requiring symmetrical or asymmetrical, single, dual or triple lobe designs.  The availability of high power audio DSP’s such as the analogue devices makes it possible to provide 24 channels of powerful processing that lead to precise beam control and even signal pattern that stays within 3 dB over a distance of 100 m.The MESSENGERG2 range is completely software controlled, the variable acoustical centre can compensate for architectural requirements and can be easily adapted for specific types of application.  Its flexible mounting height of between 1.2 and 4 m above ground level ensures the array can be securely positioned.“The MESSENGERG2 arrays are one of the only active array’s that can be used for Voice Evacuation applications where high intelligibility can be of live saving need.”
Ateis MESSENGER PRO Vertical Active DSP Array - 24 channels
Ateis MESSENGER PRO Vertical Active DSP Array - 24 channels
AT-MES-MESSENGER-XL
MESSENGERG2-XL - 24 Loudspeakers - 3042 mm - 94 dB to 40 m.          ATEÏS introduces here next generation range of steerable line-arrays that are fully redesigned to meet the current and future demands for the Voice-Alarm industry, commercial audio and Pro-sound. The MESSENGERG2  is a through ‘next generation’ design where we have focused on an improvement on the lobe-controls and the overall technical specifications, we can now say that the MESSENGERg2 provides broadcast  S/N ratio, music quality frequency respond and a pro-sound power handling with more advanced pre-processing abilities.New generation ATEÏS Voice-Alarm and audio processors are equipped with remote control facilities by LAN or WAN and have a variety of networking and control cards. To meet our future standards, the MESSENGERG2 has been equipped with equal networking facilities. The input section has been redesigned and upgraded to broadcast standards and has now 2 fully controllable audio inputs and outputs with override functions and hardware bypass function. The output to the slave unit’s caries either the pre-processed mixed signal of the input mix and thus provides easier room control as equalization and feedback filtering or the original ‘floor’- signal.Additional input-cards can be provided to have a digital link between Messengers or to interface with an ATEÏS network based on the M-Net™ or AteÏs-Net™ and can be controlled using the new ATEÏS Studio™ system designer and controller software. An optional Messenger-rack-controller (MRC), half size 1U/19 inch rack frame,  facilitates 2 fully controllable audio inputs and two slave outputs,  TCP-IP connection, RS485 and the digital networking M-Net™ to digital interface with the Messengers. The external interface is also ready to receive the instructions of the new ATEÏS Studio™ remote Control software.The MESSENGERG2 is designed to meet with the modern standards for Voice Evacuation and equipped with a dual-mode redundant power supply and redundant link between the Messengerg2 and the optional external MESSENGERg2 controller (MRC).  M-Net™ Messenger nodes can be placed up to 100 m away. For longer distances a fiber-optic convertor is available.Each MESSENGERG2 array has a very tightly controlled beam, which can be shaped as required for specific applications or environments requiring symmetrical or asymmetrical, single, dual or triple lobe designs.  The availability of high power audio DSP’s such as the analogue devices makes it possible to provide 24 channels of powerful processing that lead to precise beam control and even signal pattern that stays within 3 dB over a distance of 100 m.The MESSENGERG2 range is completely software controlled, the variable acoustical centre can compensate for architectural requirements and can be easily adapted for specific types of application.  Its flexible mounting height of between 1.2 and 4 m above ground level ensures the array can be securely positioned.“The MESSENGERG2 arrays are one of the only active array’s that can be used for Voice Evacuation applications where high intelligibility can be of live saving need.”
Ateis MESSENGER PRO Vertical Active DSP Array - 36 channels
Ateis MESSENGER PRO Vertical Active DSP Array - 36 channels
AT-MES-MESSENGER-TWO
 MESSENGERG2-Two-L - 36 Loudspeakers - 4740 mm - 94 dB to 60 m.          ATEÏS introduces here next generation range of steerable line-arrays that are fully redesigned to meet the current and future demands for the Voice-Alarm industry, commercial audio and Pro-sound. The MESSENGERG2  is a through ‘next generation’ design where we have focused on an improvement on the lobe-controls and the overall technical specifications, we can now say that the MESSENGERg2 provides broadcast  S/N ratio, music quality frequency respond and a pro-sound power handling with more advanced pre-processing abilities.New generation ATEÏS Voice-Alarm and audio processors are equipped with remote control facilities by LAN or WAN and have a variety of networking and control cards. To meet our future standards, the MESSENGERG2 has been equipped with equal networking facilities. The input section has been redesigned and upgraded to broadcast standards and has now 2 fully controllable audio inputs and outputs with override functions and hardware bypass function. The output to the slave unit’s caries either the pre-processed mixed signal of the input mix and thus provides easier room control as equalization and feedback filtering or the original ‘floor’- signal.Additional input-cards can be provided to have a digital link between Messengers or to interface with an ATEÏS network based on the M-Net™ or AteÏs-Net™ and can be controlled using the new ATEÏS Studio™ system designer and controller software. An optional Messenger-rack-controller (MRC), half size 1U/19 inch rack frame,  facilitates 2 fully controllable audio inputs and two slave outputs,  TCP-IP connection, RS485 and the digital networking M-Net™ to digital interface with the Messengers. The external interface is also ready to receive the instructions of the new ATEÏS Studio™ remote Control software.The MESSENGERG2 is designed to meet with the modern standards for Voice Evacuation and equipped with a dual-mode redundant power supply and redundant link between the Messengerg2 and the optional external MESSENGERg2 controller (MRC).  M-Net™ Messenger nodes can be placed up to 100 m away. For longer distances a fiber-optic convertor is available.Each MESSENGERG2 array has a very tightly controlled beam, which can be shaped as required for specific applications or environments requiring symmetrical or asymmetrical, single, dual or triple lobe designs.  The availability of high power audio DSP’s such as the analogue devices makes it possible to provide 24 channels of powerful processing that lead to precise beam control and even signal pattern that stays within 3 dB over a distance of 100 m.The MESSENGERG2 range is completely software controlled, the variable acoustical centre can compensate for architectural requirements and can be easily adapted for specific types of application.  Its flexible mounting height of between 1.2 and 4 m above ground level ensures the array can be securely positioned.“The MESSENGERG2 arrays are one of the only active array’s that can be used for Voice Evacuation applications where high intelligibility can be of live saving need.”
Ateis MESSENGER PRO Vertical Active DSP Array - 48 channels
Ateis MESSENGER PRO Vertical Active DSP Array - 48 channels
AT-MES-MESSENGER-TWO
MESSENGERG2-Two-XL - 48 Loudspeakers - 6084 mm - 94 dB to 70 m.      ATEÏS introduces here next generation range of steerable line-arrays that are fully redesigned to meet the current and future demands for the Voice-Alarm industry, commercial audio and Pro-sound. The MESSENGERG2  is a through ‘next generation’ design where we have focused on an improvement on the lobe-controls and the overall technical specifications, we can now say that the MESSENGERg2 provides broadcast  S/N ratio, music quality frequency respond and a pro-sound power handling with more advanced pre-processing abilities.New generation ATEÏS Voice-Alarm and audio processors are equipped with remote control facilities by LAN or WAN and have a variety of networking and control cards. To meet our future standards, the MESSENGERG2 has been equipped with equal networking facilities. The input section has been redesigned and upgraded to broadcast standards and has now 2 fully controllable audio inputs and outputs with override functions and hardware bypass function. The output to the slave unit’s caries either the pre-processed mixed signal of the input mix and thus provides easier room control as equalization and feedback filtering or the original ‘floor’- signal.Additional input-cards can be provided to have a digital link between Messengers or to interface with an ATEÏS network based on the M-Net™ or AteÏs-Net™ and can be controlled using the new ATEÏS Studio™ system designer and controller software. An optional Messenger-rack-controller (MRC), half size 1U/19 inch rack frame,  facilitates 2 fully controllable audio inputs and two slave outputs,  TCP-IP connection, RS485 and the digital networking M-Net™ to digital interface with the Messengers. The external interface is also ready to receive the instructions of the new ATEÏS Studio™ remote Control software.The MESSENGERG2 is designed to meet with the modern standards for Voice Evacuation and equipped with a dual-mode redundant power supply and redundant link between the Messengerg2 and the optional external MESSENGERg2 controller (MRC).  M-Net™ Messenger nodes can be placed up to 100 m away. For longer distances a fiber-optic convertor is available.Each MESSENGERG2 array has a very tightly controlled beam, which can be shaped as required for specific applications or environments requiring symmetrical or asymmetrical, single, dual or triple lobe designs.  The availability of high power audio DSP’s such as the analogue devices makes it possible to provide 24 channels of powerful processing that lead to precise beam control and even signal pattern that stays within 3 dB over a distance of 100 m.The MESSENGERG2 range is completely software controlled, the variable acoustical centre can compensate for architectural requirements and can be easily adapted for specific types of application.  Its flexible mounting height of between 1.2 and 4 m above ground level ensures the array can be securely positioned.“The MESSENGERG2 arrays are one of the only active array’s that can be used for Voice Evacuation applications where high intelligibility can be of live saving need.”
Ateis SMARTVOX Industrial Low Ceiling Horn
Ateis SMARTVOX Industrial Low Ceiling Horn
AT-SMA-LCS70T
The LCS70T is one of the latest products from ATEÏS and especially designed for the voice-evacuation market. The LCS70T is a typical exponential horn that is designed to be used in placed with restricted ceiling heights and where far throws are requested.The LCS70Tis made of reinforced fiber/epoxy and equipped with a strong and powerful 2” compression driver, capable of producing a fabulous 117 dB. The shape and structure allow for use in highly demanding environments like traffic tunnels and car parks. Also train tubes that need to be addressed during voice-evacuations are typical examples where the LCS70T would fit perfectly. Due to its dimensions, its throw can reach from 40 up to 70 m, reducing amplifiers and delay lines when compared to conventional distributed sound systems for tunnels. This will bring the total costs down and due to a lower number of horns, it will bring the Q-factor up and so the intelligibility of the overall evacuation system. The LCS70T has an extended frequency range that runs up to 8 kHz allowing for high-fidelity speech messages in situation where the acoustics are limited and therefore the demands on the sound system high. Highly directional horns will result in a bigger in between, repeating distance, reduced sound points and so reduced number of amplifiers and delay-lines and so, resulting in a better overall price performance. The LCS70T is a typical symmetrical exponential horn (= where the horn length is exponentially related to the horn area) that uses the mounting surface as wave guide. This way a “half cell” construction can be used, reducing its mouth height that is important when used in environment with height restrictions. Once in the proper band pass region for a given size, an exponential horn presents a fairly consistent acoustical load to its driver. This helps both output level and evenness of frequency response, and is what makes this horn design simple and effective. The LCS70T should be fixed against a large and flat surface that acts as a waveguide and mirror. The small horizontal opening angle of only 30 degrees guarantees that the sound will stay unaffected by lateral distortion and so will increases the in-between distance of the horns.
Ateis SMARTVOX Passive Vertical Line Array
Ateis SMARTVOX Passive Vertical Line Array
AT-SMA-SMARTVOX-MA12
SMARTVOX-MA12 is a vertical loudspeaker array that uses a linear spaced speaker arrangement in combination with passive phase shifting, passive power shading and filtering, to obtain a constant directivity index for multiple frequencies (Concept is based on the MESSENGER linear spaced line-arrays with patent algorithm). The fixed Azimuth angle of -12 degrees, allows for the unit to be placed vertical against any surface, resulting in more clarity, lower reverberant field and therefore a much higher ‘direct-to-reverb’ ratio, leading to a higher intelligibility figure (STI).Ordinary line-arrays radiate a cylindrical wave front that moves in a straight line from its source. Due to this a normal column needs to be tilted forward to obtain good coverage of the listening area (picture1).This is needed to focus the sound waves in forward direction into the audience area trying to avoid annoying reflections from other surfaces. Loudspeakers in general are not only producing sound forwards but also backwards especially for the lower frequencies. These sound waves are reflected by the back wall to which the array is fixed. These waves are mirrored according to the mounting angle of the array and will fill the environment with un-wanted artificial reverberation energy, leading to lower direct-to-reverb ratio and to a poor intelligibility. By ”aiming” the beam of a loudspeaker electronically using passive phase-shifting, power-shading and filtering technique for constant directivity, you can keep the column perfectly vertical position against (picture2)  its surface reducing any additional attributed energy to the reverberant field, resulting in more clarity and a much higher intelligibility. The Smartvox-MA12 distinguishes itself through its precise sound direction pattern in the vertical plane, independent of the frequency. Due to constant sound pressure over long distances fewer columns are needed, which makes the installation far more simple and effective.  
Bosch Columns Metal Column Loudspeaker 20W EN 54
Bosch Columns Metal Column Loudspeaker 20W EN 54
BO-COL-LA1-UM20E-1
Good speech intelligibility and background music reproductionFor applications where directivity is importantSlim-line weatherproof designSwivel wall mounting bracket supplied as standardRobust aluminum constructionSwitchable between 70/100 V line and 8 OhmsProvision for inside mounting of the optional line/loudspeaker supervision boardEN 54?24 certifiedBS 5839?8 and EN 60849 compliant
Bosch Columns Metal Column Loudspeaker 40W
Bosch Columns Metal Column Loudspeaker 40W
BO-COL-LA1-UM40E-1
Good speech intelligibility and background music reproductionFor applications where directivity is importantSlim-line weatherproof designSwivel wall mounting bracket supplied as standardRobust aluminum constructionSwitchable between 70/100 V line and 8 OhmsProvision for inside mounting of the optional line/loudspeaker supervision boardEN 54?24 certifiedBS 5839?8 and EN 60849 compliant
Bosch LA1 24W Column Loudspeaker, Black
Bosch LA1 24W Column Loudspeaker, Black
BO-LA1-LA1-UW24-D1
Good speech intelligibility and background music reproductionFor applications where directivity is importantHigh sensitivitySwivel wall-mounting bracket supplied as standardAvailable in black or whiteMDF constructionComplies with international installation and safety regulations
PAGE 1 OF 15